Safes with this Lock:
1. MWS Wall Safes
   These safes have been discontinued.

IMPORTANT:
1. To ensure the safety of your belongings, you MUST change the factory set code to your own unique code immediately!

OPERATING INSTRUCTIONS:

Accessories
1. Key [1 pc]
2. Batteries[5 pcs]
3. Screws for fixing [2pcs]
4. Instruction Manual [1pc]
Factory Set Code: 159

Changing Manager Code
1. Press "00" and followed by red bottom at the back of door, the safe will beep three times and the yellow light will be on
2. Input any 3 - 8 digits as the new group of management code
3. Press "#" or "*" key, the safe will beep two time and the yellow light is off, which means that the new management code has been set successfully.
Changing User Code
1. Press the red bottom at the back of door, the safe will beep two times and yellow light is on
2. Input any 3 - 8 digits as the new group of management code
3. Press "#" or "8" key, the safe will beep two times and the yellow light is off, which means that the new personal code has been set successfully.
Opening Lock
1. Input the correct management code or personal code and then press "#" or "*"
2. The safe will beep two times and green light will be on
3. Turn the knob (key) and open the door directly.
4. After three wrong groups of codes input, the safe will be locked 20 seconds
5. Open the cove of emergent key hole and open the safe directly with the emergent key when the codes forget or battery finish.
Low Battery Warning
1. The red light will be on together with green light when the voltage is low, please change the battery as sonn as possible.
2. The existing codes will be preserved with one hour after the batteries are taken out and codes will be return back to original factory set code: 159 after one hour.

Please contact Tech Support at 888.381.8514 for assistance.
Live Technical Support Available Monday - Friday 8:00am - 4:30pm [Pacific Standard Time]
Click Here to view our Mesa Safe Warranty.
Click Here to view our Limited Lifetime MBF Gun Safe Warranty.